stone slates

Reproduction grey slate made from precast concrete add charm and character to any development from new build to listed buildings or proporties in conservation areas. With a rustic texture and individual colouring that can be seen on natural stone slate roofs every reproduction slate is unique.

Every slate is coloured using the highest quality metal oxide pigments and set in moulds taken from casts of natural stone grey slate,to give that really authentic appearance that is colour fast and will weather naturally.

With the benefits of modern day manufacturing techniques and the traditional beauty of stone and at a fraction of the cost.

Details

Covering Capicity: Approximately 7.5 slates per 1M2 as laid Slate Weight: Reproduction grey slates have an average weight of 110 Kg/M sq when fixed with the standard 100mm head lap.

Ridge Weight: 20 Kg per metre run Commpression Strength: Average of approximately 35 KN Roof Pitch: Recommeded minimum roof pitch is 22.5%

Cutting: The slates are easily cut using a stone cutting disc Batton Size: Minimum 50mm x 25mm to BS 4471:1987 in not less than 1200mm lengths

Reproduction Slate laid on a new development laid in diminishing coarses. This colour was used to give the impression of old slate laid. The underside showing is used to extend its life.	This close up shows the detail on each slate.They are cast with the same sedimentary layers, that can be seen on natural stone slate.	Uniform in thickness, and available in many sizes and colours, that are ultra violet, safe and colour fast.
	Natural stone slate is also available and sold by weight.

Delivery service available